Many technologies are the catalysts behind the services of the three-dimensional printing. Most of them include the SLM, FDM, SLA, and SLS. The first to be launched and make it to the world was the SLA that stands for selective sintering Laser. The DFM came in much later. Here are things right from technology to materials that you must not know all that is related to the services and they are as follows.
1. Manufacturing application
Most of the printing companies use custom 3d printing service like the FDM of iannone3d.com. This is because injection molding can be pretty costly or even inaccessible as few people are usually interested in it. The technology of the FDM makes the market more decentralized. It is also helping in bringing down the prices.
2. Rapid prototyping
A custom 3d printing service includes the use of FDM prototyping which determines if any engineering concept has any errors or flaws. This helps in understanding if there redesigning is needed. By improvements in iterative design, multiple prototypes can be created relatively quicker in a given time span. The cost of production is also low.
3. SML/SLS materials
Selective sintering laser uses either double powder components. This usually includes two elements as can be understood. It necessarily includes plastics like polystyrene, or even sometimes composition of various materials such as the mixture of green sand.
4. The SLA materials
The method of stereo lithography makes use of the photo polymer resins which changes the properties when exposed to sunlight. It includes a broad range of customized groups of manufactured materials like thermoplastics, which are rubber-like, materials that are epoxy like and nylons.
5. FDM materials
The process of fused modeling deposition uses grade production plastics like the PLA, nylon, and ABS. The materials that are non-plastic are also used, and these include wax, steel, titanium, silver, and glass. There are also many some stable and durable plastics that are also used by printers such as ABS plus. These durable plastics are used in large injection scale molding processes of manufacturing.
6. The technique of the FDM
This technique is the most suitable method devised by companies for constructing prototypes through deposition of thermoplastic liquid plastic pools sequentially. Small dots of hot plastic usually combine with adjacent materials and ion joining becomes part of the single prototype. This process necessarily involves software called CAD or the Computer Aided Design.
7. The techniques of the SLM/SLS and SLA
There is a power source that is used for SLS technology, and it works by directing energy to a powdered material to be sintered. It does not incorporate too much heating for liquefaction and is then cured. SLA works by layering photo reactive material of the resin successively. The method of SLA is more dependent on CAD.
Each works accordingly
All the processes and the materials used by the various techniques work differently and uniquely. However, these are very vital parts of the customized three-dimensional services of printing and application of equipment is also different. The printing technology is being used for almost everything in the present times right from prototyping to manufacturing and the best part is that they can be customized.
Blog Source : http://iannone3dprint.weebly.com/